![]() ![]() In case your device has enough built in memory or if you are using Extroot, you might want to store the ddns logs persistently. Inside LuCI you could enable logfile in Advanced Settings tab of desired configuration/section.įrom console you need to edit the config file: Logfiles are automatically truncated to a settable number of lines (default 250 lines). usr /lib /ddns /dynamic_dns_updater.sh myddns 0 & Monitoringĭdns-scripts have built-in logfile support. To start your configuration via build in crond use the following entry as command inside crontab configuration (replace myddns with the name of your configuration/section): To guarantee that your configurations only run once not looking for an interface event you need to disable ddns service. The configuration/section configured to run once will stop after successful update. If you set ddns service to enable then all configurations/sections are started during interface ifup. Inside LuCI set Force Interval in Timer Settings tab of your desired configuration or edit /etc/config/ddns on console. ![]() To configure your configuration/section to run once you need to set option force_interval 0. #Dyn updater client update#To stop one configuration/section you need to list running ddns processes with:Įach configuration/section of ddns-scripts can be configured to run once including retry on error so it is guaranteed that the update is sent to the provider. Sh /usr /lib /ddns /dynamic_dns_functions.sh # note the leading period followed by a space To start all ddns-scripts configurations configured for one interface (the interface name from /etc/config/network, usually 'wan'): ![]() usr /lib /ddns /dynamic_dns_updater.sh myddns 0 & To start only one ddns-scripts configuration/section (here myddns): firewall) might be (re-)started via ifup hotplug event!įor INTERFACE, type the specified ddns-scripts interface name (the interface name from /etc/config/network, usually 'wan')ĪCTION= ifup INTERFACE=wan /sbin /hotplug-call iface Keep in mind that also other service processes (i.e. This will start all enabled ddns configurations/sections monitoring this interface. Users reported timeout problems, use links in the line below (…:8245).įrom console command line you could create an ifup hotplug event for the desired network interface. Uci commit ddns # don't forget this, otherwise data not written to configuration file Uci set = set = "wan" # network interface that should start this configuration/section Uci set _name= "" # only use names listed in /usr/lib/ddns/services # or /usr/lib/ddns/services_ipv6 (since CC 15.05) Other editors as vi needs to be installed separately.Īlternatively you can use UCI command line interface. tool fetch mode=http address="" src-path="/" dst-path="/ easiest way to configure ddns-scripts via console is to edit the file /etc/config/ddns directly using build-in vi editor or any other editor you prefer. # get the current IP address from the internet (in case of double-nat) :log info ("UpdateDynDNS: previousIP = $previousIP") :log info ("UpdateDynDNS: hostname = $hostname") #Dyn updater client password#:log info ("UpdateDynDNS: password = $password") :log info ("UpdateDynDNS: username = $username") So these two are suggestions if you are interested to be added in your official wiki page. If the $previousIP is not set then on each run the script will send an ip update request to the DynDNS server even when the ip has not be changed (this is only noticeable though the logs. So i granted policy permissions also and now everything works. So i noticed here that the suggested permissions write, test, read wasn't enough for the global variable to be set. I tried the script several times with no success but after some debugging i noticed that firstly, the router couldn't resolve the domain ( ) so i found out that the user must have set a DNS IP address under IP->DNS->Servers (maybe this must only be set up in the case you are using a local DNS as i do) and the second one was that the $previousIP variable in the script it seemed that on each run didn't have the previous value. While i was trying to find a script for updating my DynDNS domain i found in the official wiki a page with a script for this purpose. I have also set up Pi-Hole as the local DNS. I have set this router as the main router of my home network which also connects to the internet via PPPoE through the ISP modem. ![]() I just bought the HAP AC2 and i'm on the configuration period. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |